The whole equipment adopts bottle neck clamping conveying technology. From the rinsing station to the filling and capping stations, only the bottle mouth is clamped without touching the bottle body. When replacing different specifications of bottles, there is no need to adjust the equipment height, and the model change can be completed quickly only by replacing the corresponding guard plate, greatly reducing the production changeover time. The rinsing station is equipped with 360° high-pressure rotating nozzles, which fully rinse the inner wall of the glass bottle. The flip draining design makes the residual water rate in the bottle far lower than the industry average, ensuring product hygiene and safety from the source.
The filling system is equipped with high-precision special filling valves, which can switch different filling modes according to the material characteristics: the micro-vacuum mode is suitable for products requiring consistent liquid level such as juice and oral liquid, the isobaric mode is suitable for carbonated products such as beer and sparkling drinks, and the gravity mode is suitable for low-viscosity liquids such as mineral water and purified water. The whole filling process is free of dripping and foaming, and the filling accuracy is stably controlled within ±1%, greatly reducing material waste. The capping station adopts magnetic constant-torque capping heads with stepless adjustable screwing force, which will neither crack the glass bottle nor cause liquid leakage due to too loose capping, and the sealing qualification rate is stably above 99.8%.